Double Glazing Seal Repairs
If the seals of double glazing windows have been damaged, they can cause damp and mould. This can cause damage to the frame and wall surrounding it and affect your health.
Fortunately, most uPVC windows can be repaired with sealing and resealing instead of replacing. A glazier can clean the frame and the glass of the window, apply a fresh bead and smooth it.
Water Leaks
Window seals are designed for moisture to be kept out of your home. As they wear out, water may get into your windows. A leaking window is not only annoying but it can cause serious damage to the structure of your home. It's important to identify the issue early and get it repaired by an expert before it gets any worse.
The source of leaking windows can be found in the glass but on the frame or sill. This is the most frequent indication of a failed seal. It could be due to damage to the seal caused by weather or aging, worn out caulking or even a blocked drain section that results in the accumulation of water or ice.
Water that is visible between the double-glazed panes is a common indication that your window seal has failed. Although, this isn't as risky as a leak since the water doesn't travel enough to get into your home. However, it does mean, that the inert gases that are sandwiched between your windows have escaped out. This will reduce the insulation value of your window.
Condensation between the panes of glass is another common sign of a failed seal. This could be due to a failed window seal, or it could be due to an unforgiving climate in your home or a problem with the glass. It's not just annoying however, the condensation could cause mold and mildew growth within your home. This can be a challenge and expensive.
If you're noticing these signs, it's time for an inspection of your double glazed windows. Repairing or replacing your windows will protect your home against water leaks, lower the cost of energy and reduce draughts. It's a small price to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window to discuss your options regarding a window seal repair or replacement. Our staff is always ready to assist you! We offer assistance to homeowners in the Mid-Atlantic region.
Condensation
A damaged seal on the double glazing can allow water into the insulating gap. The water could cause condensation in the window panes, and could also result in misting or fogging.
When you notice condensation forming within your home, it's the perfect time to contact an experienced double glazing repair service. The condensation is a sign that the vacuum seal drawn at the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by a range of causes and is usually caused by gaskets, sealants, or insulation in the uPVC frames of the windows. There are many options for double glazing seal repair, but it's important that the new seals are properly size to ensure a perfect seal and a tight fit.
Typically gaskets used to seal the gaps between your double-glazed units are constructed from polyurethane foam. They are designed to last a long time but they are susceptible to deterioration in time due to wear and tear as well as exposure to various temperatures and weather conditions throughout the year.
As time passes the foam may shrink or crack and this creates a gap in the seal, which allows moisture to get into those areas of your double-glazed windows. This can cause condensation and decrease in energy efficiency.
One solution to the issue is to have the windows sealed. This isn't a 100% solution since it will only eliminate the condensation that is already present and not address the underlying problems that cause the double-glazed window to leak or develop condensate.
A professional who offers an insurance-backed warranty should replace your windows in full. This means that if the company fails or is shut down, you will still be protected by the insurance. It's worth mentioning that the warranty for your replacement windows should be at least 10 years.
Misting
As the autumn months approach it's a good idea to make sure that your double glazing seals are in good shape. Window seals that are worn out can affect the insulation properties of your windows as well as cause dampness, mold and condensation. To avoid further damage to your double-glazed windows and save money on energy costs, it's important to repair any issues as soon as you can.
A typical double-glazed window is made from two glass panes held together by an internal space filled with gas. The outer sealant layer fills the gap between the uPVC frames and the glass. This is vital to ensure the air-tight seal that keeps cold and warm air separate in your home, saving you the cost of heating. These seals are susceptible to damage in time due to weather conditions, aging or improper installation. The encapsulation formula that makes double glazed windows so efficient could begin to lose its effectiveness when this occurs.
If seals that are damaged or broken are not repaired they could cause dampness and condensation, which could affect your health as well as the appearance of your window. The presence of mould and damp can cause damage to your walls, floors and ceilings but can also cause allergens and irritants within your home that could be harmful to your health and your family's health.
One of the most frequent problems that can arise with your double glazing is the possibility of misting between the panes. Double Glazing Door Repairs happens when moisture is absorbed in the insulated part of your windows. It isn't easy to fix without professional double glazing repair.
DIY solutions to this issue are available, but we advise against them as they could be messy and can damage your windows. These methods involve drilling holes into your glass units and then using chemicals to get rid of the fog and condensation. This can cause a number of complications and, in particular, expose your windows to water damage, which could cause the entire unit to be destroyed.
Professional glaziers possess the knowledge, tools and experience to effectively reseal your uPVC frames and provide you with lasting results. Additionally they can also provide suggestions on the best way to keep your windows in good condition to prevent any future problems.
Draughts
A draft coming from your window is an indication that the sealant has been damaged and must be repaired or replaced. This will block cold air from getting into your home. It will also increase efficiency in energy use, decrease heating bills, and increase the comfort of your home.
It is important to keep in mind that not all draughts come from the window seals but rather from the gap between the frame and bricks. In certain cases, it can be possible to repair this by filling the gap by caulking it with silicone. If this doesn't work, it will require having the seal professionally resealed.
If the sealant around double-glazed windows starts to breakdown and allow water to enter, it can cause. This can result in damp or even mold. This could affect health and cause damage to the property. If you observe any issues with water ingress and you want to address them as soon as you can. If your windows are covered by a guarantee, it's worth checking to determine if the company who sold them will cover the cost.
It is worth checking if the windows are covered by warranties. Certain companies offer lifetime warranties and others offer 10 years. If your double glazing is covered by a warranty, you should consider contacting the company you purchased them from as soon as you can and giving them the details of any issues you are experiencing. Ideally, it is best to make this contact in person, or via letters and emails, to ensure everything is documented and clear.
Also, it is important to note that draughts are usually caused by defective hinges, not a lack effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can become stiffer over time if they are not regularly oiled. This could leave gaps between the frame and the sash which could allow cold air to enter. This problem can be solved by replacing these hinges without impacting window seals.